Safety Operating Regulations for Crawler Excavators

Release time:

2024-05-08

Before starting, the bucket should be placed on the frame, the triggers should be in a related retracted state, and the power should be turned on to confirm that the indicators of each instrument are normal

1. Inspection before starting
1. Check the technical condition of each part according to the items and standards specified in the instruction manual
2. Before starting, the bucket should be placed on the frame, the triggers should be in a related retracted state, and the power should be turned on to confirm that the indicators of each instrument are normal
2. Vehicle driving
1. When driving down hill, it is strictly forbidden to stop the engine and slide in neutral
2. Do not drive Laterally on slopes
3. It is strictly forbidden to carry people and objects in the bucket
When passing through mud, ice and snow, soft roads and road ramps with a large angle, the front and rear axles should be used to drive at the same time
3. Enter the work site
1. The ground on which the exciter is parked is flat, solid, and reliable
2. The bucket rotation space should not scratch other surrounding facilities, and it is strictly forbidden to stand or pass people within the bucket rotation range
3. Avoid working under high voltage power lines as much as possible If it is necessary to work under high voltage lines, the safety of buckets and wires should meet the regulations
4. If the evaporator is moving and exhausting, it should choose a safe and unobstructed evacuation route, otherwise the operation must be carried out after taking safety measures
4. Excavation work
1. When working on the spot, the outliers should be firmly supported, and the real tires should be slightly off the ground; Press the service brake valve and the suspension cylinder to lock the air valve to brake the front and rear wheels, and remove irrelevant supplies around the platform
2. When working on slopes, use the winch wire rope to drag the extractor
3. The landing and lifting operations of the bucket should not be too violet; The starting, turning, and stopping of the platform should be slow and steady; The bucket should not cross or stay above the cab of the transport vehicle when unloading, and the bucket should not be in contact with any part of the transport vehicle
4. It is strictly forbidden to use the bucket as an impact hammer, and it is strictly forbidden to use the bucket to clear the ground objects horizontally or to stamp the side of the excited branch
5. Pay attention to the contact point of the bucket when extracting to avoid damage to the underground pipeline 6. When extracting, do not dig too close to the fuse to prevent the fuse from being damaged by Landslides or buckets
7. When digging while moving, the digging volume of the bucket should be reduced
8. After the operation is completed, the site shall be level, the garage shall be removed, and the original ecological environment shall be restored