< 12 >

2022/06/08

Wheeled excavator safe operation rules

Before starting, the bucket should be placed on the frame, the outriggers should be in a reliable retracted state, and the power should be turned on to confirm that the indicators of each instrument are normal.

2022/06/07

What are the things that the crawler excavator often loses the chain

First, because the four wheels and belts are not on the same plane, the track derails. At this time, it means that the excavator needs to replace the guide wheel.

2022/06/14

Take you to understand the five major parts of excavators

The first is the engine part of the excavator. The oil and oil filter elements in the components must be maintained in accordance with the regulations, and the oil filter elements must be replaced in time, in order to prolong the life of the engine.

2022/06/14

Learn the maintenance of excavators from daily maintenance

It is necessary to ensure that the oil, water and hydraulic oil are checked every day, and the air filter is checked once a week for oil and excavator maintenance to prevent dust, and then checked every two days. It depends on you,

2022/06/14

Excavators take you to get rich

Friends today, we will tell you in detail. Friends, I don’t know if you have any knowledge about the daily wages of excavator workers. Although I am in the excavator industry, I am not sure about the excavator workers.

2022/06/14

How many times have you used several buckets of excavators?

The first is the very common standard bucket, which is characterized by large bucket capacity, large bucket mouth area, and large stacking surface, so it has a high filling factor, high work efficiency, and production cost. lower.

2022/06/14

What is the standard operation process of the excavator?

Learn more about the safety and detailed operation process of the excavator. The excavator is a large-scale equipment. His working scenes are in some places with complicated environments. When the excavator is operating,

2022/06/14

What material is the cylinder of the excavator

There is a guide sleeve in the oil cylinder. This part is generally made of iron balls. This can be customized according to the needs of customers, so it will be more user-friendly. The cylinder bottom inside will be made of 45 steel. This steel is cold Plasticity is general, but it has high strength and good machinability. After proper heat treatment, certain toughness, plasticity and wear resistance can be obtained, and the material source is convenient.

2022/03/29

How should the excavator be parked

First, the excavator should be parked in a flat, solid place that does not obstruct traffic, engage the reverse gear and apply the parking brake. When necessary, such as parking on a ramp, the front and rear of the walking mechanism are cushioned with wedges.

< 1 >
Kima Machinery

Linyi Kima Machinery CO.,LTD. is a professional manufacture of wheel loader and excavator in China.Our leading products include 0.6 to 3 ton wheel loader and mini excavator. 


Kima Machinery

Mobile Version